Elevation (EL) calibration on your Winegard Trav'ler Pro satellite antenna is a process to reset the elevation motor sensors. It is not part of routine maintenance and should only be performed when necessary.
When to Calibrate:
- EL MOTOR HOME FAILURE Message: If you receive this error message on your RV Halo app or control panel, it signals an issue with the elevation motor sensor, requiring calibration.
- Instructed by Winegard Support: If Winegard customer support advises you to perform an elevation calibration during troubleshooting, follow their guidance.
Important Note:
- Avoid Unnecessary Calibration: Performing EL calibration when not needed can potentially disrupt the antenna's normal operation.
How to Calibrate:
Contact Winegard Support: Reach out to Winegard customer support for guidance. They'll confirm if calibration is necessary and provide detailed instructions.
Access Calibration in RV Halo App (if instructed): If Winegard support confirms calibration is needed, they might guide you through these general steps within the RV Halo app:
- Open the RV Halo app and ensure you're connected to the Trav'ler Pro.
- Select the Trav'ler Pro from the device list.
- Navigate to the "Advanced" section.
- Look for and select "Calibration" or "EL Calibration"
- Tap the "Start Calibration" or similar button.
Follow On-Screen Prompts: The app will guide you through the calibration process, which typically involves:
- Confirming Calibration: You might need to confirm that you want to start the calibration.
- Observing Antenna Movement: The antenna will move to its upper and lower limits. Do not obstruct its movement.
- Calibration Completion: The app will notify you when the calibration is finished.
Important Considerations during Calibration:
- Clear Obstructions: Ensure there are no obstructions around the antenna that could hinder its movement.
- Power Source: Make sure the antenna has a stable power source throughout the calibration.
Benefits of Calibration (when needed):
- Resolves EL MOTOR HOME FAILURE Errors: Calibration can fix issues with the elevation motor sensor, allowing the antenna to function correctly.
Remember:
- Always follow Winegard's instructions: If you need to calibrate, adhere to the specific guidance provided by Winegard customer support.
By understanding when and how to calibrate your Trav'ler Pro's elevation, you ensure its optimal performance and avoid unnecessary adjustments to your antenna system.