WiFi Ranger Troubleshooting: No SSID

Troubleshooting: WiFi Ranger "No SSID" Issue

The "No SSID" issue on your WiFi Ranger indicates that the device is not broadcasting its network name, making it invisible to your devices. This guide will help you troubleshoot and resolve this problem.

Troubleshooting Steps

  1. Check Power and LEDs:

    • Indoor Routers: Verify that the router is powered on and the LEDs are illuminated. If not, refer to the "No Power" troubleshooting guide. Troubleshooting: WiFi Ranger No Power​
    • Outdoor Routers: Confirm the unit is powered on.

  2. Power Cycle the Device:

    • Turn off the WiFi Ranger, wait 5 minutes, and then turn it back on.

  3. Perform a Factory Reset (If SSID Still Not Broadcasting):

    • Follow the factory reset procedure specific to your WiFi Ranger model. The general steps are:
      1. Unplug or switch off the power to the WiFi Ranger (wait 5 seconds).
      2. Power on (wait 2 minutes 30 seconds), power off (wait 5 seconds).
      3. Power on (wait 3 minutes 30 seconds), power off (wait 5 seconds).
      4. Power on (wait 3 minutes 30 seconds), power off (wait 5 seconds).
      5. Power on (wait 3 minutes).
      6. Check if the SSID is now broadcasting.

Possible Outcomes

  • SSID is Broadcasting: The issue is resolved. If you need help setting up the device, refer to the relevant documentation.
  • SSID is Still Not Broadcasting: If the previous steps didn't work, submit a support ticket to Winegard Customer Support for further assistance.

Important Notes

  • Always refer to your specific WiFi Ranger model's manual for precise instructions and safety precautions.
  • If you're uncomfortable performing any of these steps, seek assistance from a qualified technician.

By following these troubleshooting steps, you should be able to resolve the "No SSID" issue and get your WiFi Ranger back up and running.


    • Related Articles

    • Troubleshooting: WiFi Ranger Not Connecting to WiFi

      The WiFi Ranger is designed to provide seamless internet connectivity, but encountering issues connecting to a WiFi network can disrupt your online experience. This guide will walk you through troubleshooting steps to help you resolve this problem. ...

    • Troubleshooting: WiFi Ranger Not Connecting to Cellular

      If your WiFi Ranger is not connecting to cellular data, follow these troubleshooting steps: Check the Control Panel: Connect to the WiFi Ranger's SSID and access the webUI at mywifiranger.com. If the Control Panel shows "Using Cellular Data" under ...

    • Troubleshooting: Winegard Router No SSID Broadcast

      Issue: You're unable to find your Winegard router's network name (SSID) when trying to connect your devices. Possible Causes: SSID Broadcast Disabled: The SSID broadcast feature might be turned off in the router's settings. Router Power Issue: The ...

    • Troubleshooting: WiFi Ranger No Power

      The WiFi Ranger is an essential tool for staying connected on the road, but encountering a "No Power" issue can be frustrating. This guide will walk you through troubleshooting steps to help you get back online. Troubleshooting Steps Check for LEDs ...

    • WiFi Ranger: Connecting to Local WiFi

      WiFi Ranger devices act as a bridge between your campground's WiFi and the devices inside your RV. Here's how to get your WiFi Ranger up and running: What You'll Need: Your WiFi Ranger's SSID and password, found on a sticker on your WiFi Ranger. A ...